-
A / E-Pod Detects the E-Field that surrounds Static Electricity$45.00E-Pod Detects the E-Field that surrounds Static Electricity
What is Static Electricity
Static electricity is the buildup of electrical charges on the surface of some object or material. Static Electricity can consist of extremely high voltage, this device can sense those high-voltage electrically charged objects at a great distance at a detection sensitivity as low as 500mV. Electro-static is usually created when materials are pulled apart or rubbed together. Basically, it is the imbalance between (+) positive and (-) negative particles on these objects or surfaces. Although the atoms on these surfaces are always full of charges, they become "electrified" whenever their pre-existing + and - charges are not equal. Some typical examples would be wool, plastic, or even the soles of your shoes as you walk across the carpet. This process causes positive (+) charges to collect on one material and negative (-) Charges on the other surface. An e-field Pod can be compared to a magnetic field, except that it's electrical in nature. Another way of looking at it is that an e-field is a voltage without a current, and whenever you have pure voltage, then you will have a pure electric field with no magnetism involved.
Keep in mind that during use that Static electricity is formed much better when the air is dry or the humidity is low. The E-Pod can detect static up to several feet when the air is very dry. When the air is humid, water molecules can collect on the surface of various materials and this can prevent the buildup of electrical charges and minimize the detection range considerably.
How to Use the E-Pod
Turn on the E-Pod and place the unit on a table or desk. The Green, Blue or Red light may or may not be illuminated at this time, it really depends on the “+” or “-” static charge around the E-Pod. Take a plastic pen or comb and rub it in your hair a few times. Now take the pen or comb and pass it slowly a few inches over the E-Pod. The comb or pen should have a negative “-” charge on it which will make the light turn on. Now you will notice that the light will begin to dim and then go out completely as the pen gets closer to the E-Pod. Move the pen or comb away, and the light will glow bright again. Depending on the humidity and other factors, the E-Pod can easily detect an E-Field charge up to 2-8 feet away.
Note: With a Negative charged condition, the light will remain ON and as a charged object slowly approaches the E-Pod, the light will begin to dim in relationship to the e-field strength and proximity to the static source. Eventually the Light will go off when the charge is within a few inches of the E-Pod. The light will slowly come back on again when the charged object moves away from the E-Pod.
Note: With a Positive charged condition, the light will remain OFF and as a charged object gets close to the E-Pod, the light will come on. It then turns OFF when the charged object is removed.
Important: The E-field Pod has been added to assist a Paranormal Investigator make an informed decision based on Electro-Static evidence collected during an investigation. When you are performing your investigation, team members will often refer to the “hair” standing up on their arms or the back of their neck. This added feature can help to detect this invisible E-field that causes this condition.
-
P-SB7 DELUXE KIT / Mini Frequency Sweep Radio ITC Device$119.95Mini AM/FM Frequency Sweep Radio
(MP3 Speaker & Batteries Included )
Internal Speaker
The P-SB7 is a mini size Spirit Box the size of an MP3 player. Designed by Gary Galka. The P-SB7 made its premier debut on Ghost Adventures "LIVE" show from the Trans-Allegheny Lunatic Asylum on October 30, 2009 Where the P-SB7 was used by Chris, a Sensitive, Paranormal Investigator and expert in the Paranormal field. The P-SB7 provided responses to his questions in real time over a 40 minute segment of the show. When used by a properly trained individual, under certain circumstances, the P-SB7 will provide results similar that of an EVP recorder, but in real time.
The P-SB7 utilizes a milli-second adjustable Forward or Reverse frequency "sweep" technique coupled with a proprietary high frequency synthetic noise or "white noise" distributed between frequency steps. There are two discreet audio outputs; (1) Earphone, and (1) Speaker. A bright EL back light display with manual ON/OFF select is ideal for viewing in the dark. The P-SB7 has an internal recharge circuit that maintains power to two "AAA" rechargeable batteries. The P-SB7 is intended to be used by professional investigators to help promote the field of Paranormal ITC Research.
You can see the CON-TACT Team's AMAZING Footage on youtube.com
http://www.youtube.com/watch?v=AIxtsD6pBRo -
Sony DVR-01 Night Vision Motion Camera Audio/Video$155.95NIGHT VISION INFRA RED MOTION SENSITIVE Captures Audio Picture & Video
Better Than any Simple Alarm or Motion Detector. This Device has an Audible Alarm (if enabled), Records Audio, Video , & Takes Pictures when Something is Detected! Perfect for Monitoring hallways, stairs, rooms during an Investigation. All evidence is Date and Time Stamped. This Mini DVR with Color Sony CCD Camera and IR Illuminators is perfect for Paranormal Investigations. The best part about this device is that it has Real Time Audio & will Record Video in AVI format and pictures in JPG, and the Recording only occurs if and when there is Motion, PIR or Motion and PIR combined. You select the adjustment and the sensitivity based on your Investigation parameters thru a menu driven prompt on any video input monitor. Or use the operator interactive touch pad on the rear of the
camera. It is so easy to use and operate. All evidence captured is stored onto a 4 GB SD Card for ease and compatibility. The Mini DVR-01 operates for up to 4 hours using a built-in lithium rechargeable battery, and can also operate using the supplied AC adapter/ charger. It can operate in total darkness using built in IR illuminators , and has up to a 24' IR range. The range can be greatly increased with external IR illumination.
Features
• Built-in Microphone records real time audio
• High Quality Sony Color Camera with Night Vision
• Configurable for Motion, PIR or Both Combined
• Audible Alarm (can be armed or disarmed)
• Automatically Records AVI movies and JPG pictures
• Supports 2 GB or 4 GB SD Cards
• Internal Rechargeable Lithium Battery
• Real Time date and Time stamp
• Night Vision Use
• Review Pictures using TV or Monitor
• Blinking Light Tells you if something has been captured
Package Includes:
1. Mini DVR-01 with Sony Night Vision
2. AV Cable
3. Mini Plug in Alarm
4. Wireless Remote Controller
5. AC Power Adapter/Recharger
6. BNC Connector
7. Mounting Bracket
8. Elf Zone EMF Detector Included FREE!
Note: Tripod and SD Card Not included
SpecificationsItems Data Power supply DC 5V Current Draw 500mA-800mA AV out impedance 75Ω AV Out Volt 1Vp-p TV Mode PAL / NTSC Internal camera SONY CCD Trigger for record Motion, PIR or Both Trigger for alarm Motion, PIR or Both -
DAS-EVP / Worlds First Expandable Digital EVP Recorder Designed Exclusively from the "Ground Up" For Paranormal Research Applications$179.95Worlds First Expandable Digital EVP Recorder Designed Exclusively from the "Ground Up" For Paranormal Research Applications.
This is a High End, CD quality EVP recorder. Several important features have been designed into this instrument that allow the user to add additional features and functionality as their investigative learning skills advance. When you buy the DAS-EVP, you are essentially buying our most advanced RT-EVP device with limited software capabilities that do not include the Real Time Playback and Frequency Sweep function. If at any time you wish to purchase and advance to the full function RT-EVP device, we will provide you with a user specific password at the time of purchase that will activate the other features instantly. It's that simple!
Worlds First Expandable Digital EVP Recorder Designed Exclusively from the "Ground Up" For Paranormal Research Applications.
This is a High End, CD quality EVP recorder. Several important features have been designed into this instrument that allow the user to add additional features and functionality as their investigative learning skills advance. When you buy the DAS-EVP, you are essentially buying our most advanced RT-EVP device with limited software capabilities that do not include the Real Time Playback and Frequency Sweep function. If at any time you wish to purchase and advance to the full function RT-EVP device, we will provide you with a user specific password at the time of purchase that will activate the other features instantly. It's that simple!
• Modular Design with Security Code Interface Offers User Expandability at ANY Time
• Operates as a Standard EVP Voice Recorder ( No Real Time Playback or Frequency Sweep)
• The Only Digital Recorder with a Frequency Response of 15Hz - 20KHz
• CD Stereo Quality PCM Coding Technique operates at a Sample Rate of 96KHz. PCM is the best way to convert Sound or Analog data to binary (digital) data. It is used on all CD's, DVD-Audio and just about every other digital audio format available.
• 63.5dB Recording Sensitivity Amplifies any Subtle Sounds around you for easy detection with Earbuds or Headset.
• High Brightness Backlight Display with manual ON/OFF, easily illuminates Doorways, Stairs and Corridors for emergency Navigation situations.
• Left & Right Audio Recording Level Bargraph Display Provides Visual indication of slight Ambient Sound Fluctuations
• 4GB Memory (at 96KHz provides about 3 Hours of recording time) -
RT-EVP Gen II (2) Real Time EVP Recorder IN STOCK$279.00Worlds first Real Time EVP Recorder RT-EVP For Paranormal Use LIMITED STOCK (in Stock)
The New RT-EVP Interactive digital voice recorder designed exclusively for the paranormal market. Designed with the paranormal enthusiast in mind, this sleek new recorder boosts many of the key, essential features that paranormal enthusiasts require, which are unobtainable with the conventional off the shelf products currently available. This new device is sure to catch the attention of the amateur and professional alike who are seeking new and more efficient ways to enhance their investigative skills said Gary Galka, the designer and President of DAS. It is my aspiration that the features and functionality of this new Instrumental Transcommunication (ITC) device, help bring us all one step closer to better understanding not only the world we live in now, but to also help us to appreciate and prepare for the world that awaits us all in the hereafter. PLAYBACK FEATURES: Intuitive Design Optimized for Simultaneous RECORD / PLAYBACK Users of the new RT-EVP will quickly appreciate and benefit from the simultaneous Record and Playback feature. During a standard EVP session, a user will typically ask a series of questions over a period of time unaware of any response that may be captured during the session. This data is then later reviewed hours or sometimes even days later, which is very inefficient and time consuming. One of the key features of the RT-EVP allows the user to extract, play and hear the saved voice data file while it is still Recording Live. An adjustable 1-15 second Playback On Delay allows the user to ask questions and hear any response that follows within the 1-15 second user selectable window. A simple question typically takes about 3 seconds to ask. So, if you have the delay set for 5 seconds, you would hear your question repeated back to you in the 5 seconds followed by any ethereal response recorded. If you think you hear something but you are not sure during the Real Time operation, there is a quick review button that allows you to back up in 5 second increments each time it is pressed without disturbing or interrupting your session. FREQUENCY SWEEP FEATURES: Additional Functions added for user Convenience If the Simultaneous Record and Playback feature is not enough to catch your attention, perhaps the Frequency Sweep interface will. This fascinating technology is believed to permit real time Communication using AM or FM frequency sound bites coupled with white noise The RT-EVP can scan the entire FM range of 88.0MHz to 108.0 MHz in about 12 seconds, or 60msec/step. The device can RECORD while Sweeping the FM band, which eliminates the need for a separate recorder. In addition, the RT-EVP will capture all of your questions and any local EVP with its internal microphone. The ability to Record Live and hear your voice or EVP superimposed over the FM audio at the same time, opens the door to new types of testing that have yet to be performed, with results yet to be discovered. This Sweep feature is further enhanced through the use of the quick review button. Again, this feature provides an invaluable purpose that allows any suspect historical data to be analyzed in real time without interrupting the recording session. Intuitive Design with Large Backlit Display: The RT-EVP button interface is positioned for ease of use. Record, Play, Menu and Volume controls are easy to navigate and use. The Large LCD display has a backlight that can be turned On/Off manually. Or, you can apply a timer with pre-defined Off Delays from the Index Menu. A 360-degree Omni-directional stereo microphone is located at the top of the device, and a small 20mm speaker is located at the rear. Accessories: Remote Control Availability: NOW
Pricing: $289.95 -
RT-EVP Gen II (2) Real Time EVP Recorder IN STOCK (outside North America)$279.00Worlds first Real Time EVP Recorder RT-EVP For Paranormal Use LIMITED STOCK (in Stock)
The New RT-EVP Interactive digital voice recorder designed exclusively for the paranormal market. Designed with the paranormal enthusiast in mind, this sleek new recorder boosts many of the key, essential features that paranormal enthusiasts require, which are unobtainable with the conventional off the shelf products currently available. This new device is sure to catch the attention of the amateur and professional alike who are seeking new and more efficient ways to enhance their investigative skills said Gary Galka, the designer and President of DAS. It is my aspiration that the features and functionality of this new Instrumental Transcommunication (ITC) device, help bring us all one step closer to better understanding not only the world we live in now, but to also help us to appreciate and prepare for the world that awaits us all in the hereafter. PLAYBACK FEATURES: Intuitive Design Optimized for Simultaneous RECORD / PLAYBACK Users of the new RT-EVP will quickly appreciate and benefit from the simultaneous Record and Playback feature. During a standard EVP session, a user will typically ask a series of questions over a period of time unaware of any response that may be captured during the session. This data is then later reviewed hours or sometimes even days later, which is very inefficient and time consuming. One of the key features of the RT-EVP allows the user to extract, play and hear the saved voice data file while it is still Recording Live. An adjustable 1-15 second Playback On Delay allows the user to ask questions and hear any response that follows within the 1-15 second user selectable window. A simple question typically takes about 3 seconds to ask. So, if you have the delay set for 5 seconds, you would hear your question repeated back to you in the 5 seconds followed by any ethereal response recorded. If you think you hear something but you are not sure during the Real Time operation, there is a quick review button that allows you to back up in 5 second increments each time it is pressed without disturbing or interrupting your session. FREQUENCY SWEEP FEATURES: Additional Functions added for user Convenience If the Simultaneous Record and Playback feature is not enough to catch your attention, perhaps the Frequency Sweep interface will. This fascinating technology is believed to permit real time Communication using AM or FM frequency sound bites coupled with white noise The RT-EVP can scan the entire FM range of 88.0MHz to 108.0 MHz in about 12 seconds, or 60msec/step. The device can RECORD while Sweeping the FM band, which eliminates the need for a separate recorder. In addition, the RT-EVP will capture all of your questions and any local EVP with its internal microphone. The ability to Record Live and hear your voice or EVP superimposed over the FM audio at the same time, opens the door to new types of testing that have yet to be performed, with results yet to be discovered. This Sweep feature is further enhanced through the use of the quick review button. Again, this feature provides an invaluable purpose that allows any suspect historical data to be analyzed in real time without interrupting the recording session. Intuitive Design with Large Backlit Display: The RT-EVP button interface is positioned for ease of use. Record, Play, Menu and Volume controls are easy to navigate and use. The Large LCD display has a backlight that can be turned On/Off manually. Or, you can apply a timer with pre-defined Off Delays from the Index Menu. A 360-degree Omni-directional stereo microphone is located at the top of the device, and a small 20mm speaker is located at the rear. Accessories: Remote Control Availability: NOW
Pricing: $289.95 -
K2-Navigator / EMF Meter with On/Off Switch / Night Vision Safe LED$69.95KII Pro Navigator / EMF Meter with On/Off Switch and Night Vision Safe Red Light Source
• Night Vision Safe, High Intensity Red LED Navigator
easily Illuminates the floor in front of you
and objects within a 30' Range.
• K3 with Exclusive Push On / Push Off Switch - No Visible external Switch
• Easy to read Multi-Segment LED Display
• Detects the ELF range (50 to 1,000Hz) & VLF
range (1,000 to 20,000Hz)
• Five level milliGauss ranges
• 50 & 60 Hz operation
• 9Vdc Operation
• Single Axis
• Accuracy of ±5% at 50-60Hz
• Instantaneous Response To EMF Fluctuations
& Spikes
Red Navigator
This feature utilizes a high intensity long life (100,000 hours) Collimated Red light to provide instant illumination of the floor in front of you, and of objects up to 30' away.The 670nm LED wavelength will not interfere with Nigh Vision Equipment.
The Navigator feature on the KII takes the place of a flashlight.
Note to User
Due to the ability of the design of the K-II Meter to detect EMF across a
very broad band of sensitivity it is urged to turn off cell phones, and other
RF transmitting / communication devices to help prevent false readings.
ALSO - USE ALKALINE BATTERIES -
K2 Pro Navigator (Outside North America)$69.95KII Pro Navigator / EMF Meter with On/Off Switch and Night Vision Safe Red Light Source
• Night Vision Safe, High Intensity Red LED Navigator
easily Illuminates the floor in front of you
and objects within a 30' Range.
• K3 with Exclusive Push On / Push Off Switch - No Visible external Switch
• Easy to read Multi-Segment LED Display
• Detects the ELF range (50 to 1,000Hz) & VLF
range (1,000 to 20,000Hz)
• Five level milliGauss ranges
• 50 & 60 Hz operation
• 9Vdc Operation
• Single Axis
• Accuracy of ±5% at 50-60Hz
• Instantaneous Response To EMF Fluctuations
& Spikes
Red Navigator
This feature utilizes a high intensity long life (100,000 hours) Collimated Red light to provide instant illumination of the floor in front of you, and of objects up to 30' away.The 670nm LED wavelength will not interfere with Nigh Vision Equipment.
The Navigator feature on the KII takes the place of a flashlight.
Note to User
Due to the ability of the design of the K-II Meter to detect EMF across a
very broad band of sensitivity it is urged to turn off cell phones, and other
RF transmitting / communication devices to help prevent false readings.
ALSO - USE ALKALINE BATTERIES -
The Mel-8704-ProNavigator, is available as a Limited Edition Model.
We are currently only building small monthly quantities of this item.
It is intended for use by Professional Paranormal Investigators.
Model: Mel-8704 ProNavigator with 30' Range
3 in 1 Instrument (EMF - Temperature - Flashlight)
Delivery: Stock
The Mel Meter Model 8704 is an Intelligent microprocessor based instrument specifically designed for Paranormal Investigators & Enthusiasts. Several Important features have been incorporated into this durable, precision hand held instrument. All of them accessible with the meter being held in on hand.
Measures EMF & Temperature "Cold Spots" Simultaneously
That's right...the Mel Meter is the only Instrument that can do this. If you're a Sci Fi Ghost Hunter fan, you'll notice that during their Investigations, they will often encounter an EMF change which is usually followed by a significant Temperature drop. Now, imagine being able to validate both changes simultaneously, and be able to track the source in real time with one hand in total darkness! No more fumbling for a flashlight to see the display in the dark.
Measures ELF Down to 30Hz!
It has been the generally accepted theory that spirits do emit an extremely low frequency (ELF) EM field, which commonly registers between 2.0 and 7.0 mG in strength. Typically, anything below 40Hz would be considered part of the ELF range. The Mel-8704 was designed to address this ELF range, and is actually 20Hz lower than a KII's 50Hz bandwidth.
Custom "Night View" Display
The Backlight display measures a full 2" x 1" with a 0.60" EMF display and 0.25" Ambient Temperature on the same screen. Both measurements can be read from 10' to 15' away.
The display can be turned On or OFF manually for display viewing in dark areas, and it is also bright enough so that it can be used in total darkness to navigate stairwells, corridors and door ways. Illumination of objects up to 8' away is possible with this special display once your eyes become adjusted to the light.
EMF "Burst Mode"
This feature allocates 100% of the micro-processors scan speed to monitor dynamic EMF changes. The display can update so quickly that your eyes will barley be able to keep up with it. If something is on the move, this feature can be activated with the push of a button. I like to use the "Record" function in this mode because it can capture the Min & Max measured values
So, if you have a EMF meter with a standard LCD display, get ready for a big change!
Red Navigator (Night Vision Safe) or Blue / White (General Purpose Use)
This feature utilizes a high intensity long life (100,000 hours) Collimated Red LED to provide instant illumination of the floor in front of you, and of objects up to 30' away. Ideal for fast paced tracking of EMF and Cold Spot changes in total darkness while using the backlight display, this 670nm wavelength will not interfere with Nigh Vision Equipment. The White is good if Night Vision is not being used.
Even after 5 hours of 100% continuous uninterrupted usage, The digital current regulation circuitry provides plenty of energy to power the Mel Meter and backlight Display for many more hours.
Mel-Cal
The Mel Meter is the only Intelligent EMF / Temperature device that uses a proprietary "Smart Calibration" function that allows the user to Calibrate the instrument in the field. Should the unlikely event ever occur, and the unit performs out of Spec. All you need to do is contact us and give us your serial number ID. We will provide you with a special code sequence to get your unit working in "Like New" condition again...it's that simple! -
MEL-8704 Pro Navigator (OUTSIDE NORTH AMERICA) AIR MAIL$94.00The Mel-8704-ProNavigator Green LCD Display INTERNATIONAL ORDERS OUTSIDE NORTH AMERICA
The Mel-8704-ProNavigator, is available as a Limited Edition Model.
We are currently only building small monthly quantities of this item.
It is intended for use by Professional Paranormal Investigators.
Model: Mel-8704 ProNavigator with 30' Range
3 in 1 Instrument (EMF - Temperature - Flashlight)
Delivery: Stock
The Mel Meter Model 8704 is an Intelligent microprocessor based instrument specifically designed for Paranormal Investigators & Enthusiasts. Several Important features have been incorporated into this durable, precision hand held instrument. All of them accessible with the meter being held in on hand.
Measures EMF & Temperature "Cold Spots" Simultaneously
That's right...the Mel Meter is the only Instrument that can do this. If you're a Sci Fi Ghost Hunter fan, you'll notice that during their Investigations, they will often encounter an EMF change which is usually followed by a significant Temperature drop. Now, imagine being able to validate both changes simultaneously, and be able to track the source in real time with one hand in total darkness! No more fumbling for a flashlight to see the display in the dark.
Measures ELF Down to 30Hz!
It has been the generally accepted theory that spirits do emit an extremely low frequency (ELF) EM field, which commonly registers between 2.0 and 7.0 mG in strength. Typically, anything below 40Hz would be considered part of the ELF range. The Mel-8704 was designed to address this ELF range, and is actually 20Hz lower than a KII's 50Hz bandwidth.
Custom "Night View" Display
The Backlight display measures a full 2" x 1" with a 0.60" EMF display and 0.25" Ambient Temperature on the same screen. Both measurements can be read from 10' to 15' away.
The display can be turned On or OFF manually for display viewing in dark areas, and it is also bright enough so that it can be used in total darkness to navigate stairwells, corridors and door ways. Illumination of objects up to 8' away is possible with this special display once your eyes become adjusted to the light.
EMF "Burst Mode"
This feature allocates 100% of the micro-processors scan speed to monitor dynamic EMF changes. The display can update so quickly that your eyes will barley be able to keep up with it. If something is on the move, this feature can be activated with the push of a button. I like to use the "Record" function in this mode because it can capture the Min & Max measured values
So, if you have a EMF meter with a standard LCD display, get ready for a big change!
Red Navigator (Night Vision Safe) or Blue / White (General Purpose Use)
This feature utilizes a high intensity long life (100,000 hours) Collimated Red LED to provide instant illumination of the floor in front of you, and of objects up to 30' away. Ideal for fast paced tracking of EMF and Cold Spot changes in total darkness while using the backlight display, this 670nm wavelength will not interfere with Nigh Vision Equipment. The White is good if Night Vision is not being used.
Even after 5 hours of 100% continuous uninterrupted usage, The digital current regulation circuitry provides plenty of energy to power the Mel Meter and backlight Display for many more hours.
Mel-Cal
The Mel Meter is the only Intelligent EMF / Temperature device that uses a proprietary "Smart Calibration" function that allows the user to Calibrate the instrument in the field. Should the unlikely event ever occur, and the unit performs out of Spec. All you need to do is contact us and give us your serial number ID. We will provide you with a special code sequence to get your unit working in "Like New" condition again...it's that simple! -
Mel Meter 8704R is Designed Exclusively For Paranormal Investigators
• ELF Range down to 30Hz !
• Night Vision Safe, High Intensity Red Flashlight & Red Backlight
• Custom Dual Display Correlates EMF & Temperature Cold Spots Simultaneously!
• Custom Glow-In-The-Dark Push Buttons. A 30 sec. Charge from Your Flashlight
Lasts 3 Hours!
• Custom Glow-In-The-Dark Lightning Bolt EMF Stickers Help Identify EMF
"Hot Spots" for De-Bunking During Baseline Analysis.
• EMF "Burst" Mode Feature is Ideal for Sweeping a room & Tracking Dynamic EMF movement
• Measurement Ranges: 20, 200, 2000 uTesla
200, 2000, 20,000 mGauss
• Super Bright Custom Red "Night view" Display with On/Off Button
• Fast Response Type "K" Thermocouple Temperature Sensor
• Record Feature Captures Min & Max Values
The Mel Meter Model 8704R is an Intelligent microprocessor based instrument specifically designed for Paranormal Investigators & Enthusiasts. Several Important features have been incorporated into this durable, precision hand held instrument. All of them accessible with the meter being held in on hand.
Measures EMF & Temperature "Cold Spots" Simultaneously
That's right...the Mel Meter is the only Instrument that can do this. If you're a Sci Fi Ghost Hunter fan, you'll notice that during their Investigations, they will often encounter an EMF change which is usually followed by a significant Temperature drop. Now, imagine being able to validate both changes simultaneously, and be able to track the source in real time with one hand in total darkness! No more fumbling for a flashlight to see the display in the dark.
Measures ELF Down to 30Hz!
It has been the generally accepted theory that spirits do emit an extremely low frequency (ELF) EM field, which commonly registers between 2.0 and 7.0 mG in strength. Typically, anything below 40Hz would be considered part of the ELF range. The Mel-8704 was designed to address this ELF range, and is actually 20Hz lower than a KII's 50Hz bandwidth.
Custom Red "Night View" Display
The Backlight display measures a full 2" x 1" with a 0.60" EMF display and 0.25" Ambient Temperature on the same screen. Both measurements can be read from 10' to 15' away.
The display can be turned On or OFF manually for display viewing in dark areas, and it is also bright enough so that it can be used in total darkness to navigate stairwells, corridors and door ways. Illumination of objects up to 8' away is possible with this special display once your eyes become adjusted to the light.
EMF "Burst Mode"
This feature allocates 100% of the micro-processors scan speed to monitor dynamic EMF changes. The display can update so quickly that your eyes will barley be able to keep up with it. If something is on the move, this feature can be activated with the push of a button. I like to use the "Record" function in this mode because it can capture the Min & Max measured values
So, if you have a EMF meter with a standard LCD display, get ready for a big change!
Red Navigator Flashlight (Night Vision Safe)
This feature utilizes a high intensity long life (100,000 hours) Collimated Red LED to provide instant illumination of the floor in front of you, and of objects up to 30' away. Ideal for fast paced tracking of EMF and Cold Spot changes in total darkness while using the backlight display, this 670nm wavelength will not interfere with Nigh Vision Equipment. The White is good if Night Vision is not being used.
Even after 5 hours of 100% continuous uninterrupted usage, The digital current regulation circuitry provides plenty of energy to power the Mel Meter and backlight Display for many more hours.
Mel-Cal
The Mel Meter is the only Intelligent EMF / Temperature device that uses a proprietary "Smart Calibration" function that allows the user to Calibrate the instrument in the field. Should the unlikely event ever occur, and the unit performs out of Spec. All you need to do is contact us and give us your serial number ID. We will provide you with a special code sequence to get your unit working in "Like New" condition again...it's that simple! -
Mel Meter 8704R "VIBE" EMF Detector$145.00Mel-8704R-Vibe ProNavigator / EMF & "COLD SPOT" Instrument with Vibration & Touch Detection!
Just Released 6/15/09
Mel-8704R-Vibe ProNavigator is Designed Exclusively For Paranormal Investigators
Now with High Sensitivity Vibration and Touch Detection
• ELF Range down to 30Hz !
• Night Vision Safe, High Intensity Red Flashlight & Red Backlight
• High Sensitivity (1Hz-10Hz)Vibration / Touch Detection- 2 sec. Beep with Auto Reset
• Custom Dual Display Correlates EMF & Temperature Cold Spots Simultaneously!
• Custom Glow-In-The-Dark Push Buttons. A 30 sec. Charge from Your Flashlight
Lasts 3 Hours!
• Custom Glow-In-The-Dark Lightning Bolt EMF Stickers Help Identify EMF
"Hot Spots" for De-Bunking During Baseline Analysis.
• EMF "Burst" Mode Feature is Ideal for Sweeping a room & Tracking Dynamic EMF movement
• Measurement Ranges: 20, 200, 2000 uTesla
200, 2000, 20,000 mGauss
• Super Bright Custom Red "Night view" Display with On/Off Button
• Fast Response Type "K" Thermocouple Temperature Sensor
• Record Feature Captures Min & Max Values
The Mel Meter Model 8704R-Vibe is an Intelligent microprocessor based instrument specifically designed for Paranormal Investigators & Enthusiasts. Several Important features have been incorporated into this durable, precision hand held instrument. All of them accessible with the meter being held in on hand.
Measures EMF & Temperature "Cold Spots" & Vibration / Touch Simultaneously
That's right...the Mel Meter is the only Instrument that can do this. If you're a Sci Fi Ghost Hunter fan, you'll notice that during their Investigations, they will often encounter an EMF change which is usually followed by a significant Temperature drop. Now, imagine being able to validate both changes simultaneously, and be able to track the source in real time with one hand in total darkness! No more fumbling for a flashlight to see the display in the dark.
Measures ELF Down to 30Hz!
It has been the generally accepted theory that spirits do emit an extremely low frequency (ELF) EM field, which commonly registers between 2.0 and 7.0 mG in strength. Typically, anything below 40Hz would be considered part of the ELF range. The Mel-8704 was designed to address this ELF range, and is actually 20Hz lower than a KII's 50Hz bandwidth.
Custom Red "Night View" Display
The Backlight display measures a full 2" x 1" with a 0.60" EMF display and 0.25" Ambient Temperature on the same screen. Both measurements can be read from 10' to 15' away.
The display can be turned On or OFF manually for display viewing in dark areas, and it is also bright enough so that it can be used in total darkness to navigate stairwells, corridors and door ways. Illumination of objects up to 8' away is possible with this special display once your eyes become adjusted to the light.
EMF "Burst Mode"
This feature allocates 100% of the micro-processors scan speed to monitor dynamic EMF changes. The display can update so quickly that your eyes will barley be able to keep up with it. If something is on the move, this feature can be activated with the push of a button. I like to use the "Record" function in this mode because it can capture the Min & Max measured values
So, if you have a EMF meter with a standard LCD display, get ready for a big change!
Red Navigator Flashlight (Night Vision Safe)
This feature utilizes a high intensity long life (100,000 hours) Collimated Red LED to provide instant illumination of the floor in front of you, and of objects up to 30' away. Ideal for fast paced tracking of EMF and Cold Spot changes in total darkness while using the backlight display, this 670nm wavelength will not interfere with Nigh Vision Equipment. The White is good if Night Vision is not being used.
Even after 5 hours of 100% continuous uninterrupted usage, The digital current regulation circuitry provides plenty of energy to power the Mel Meter and backlight Display for many more hours.
Mel-Vibe
This feature utilizes a high sensitivity Accelerometer to detect just the slightest Touch or Vibration. Another useful tool to engage spirit when gathering evidence. We had a lot of fun testing this new feature out. Imagine something so sensitive that it detects a cotton ball, paper clip, piece of popcorn or a slight tap of your finger anywhere on a 8 long wood table top! Or, being able to detect a foot "stomp" on a 4" slab of concrete from 30' away!
It can even detect the sound pressure level / frequency from your voice if you shout toward it from 4' away. many people have felt the sensation of a touch on their arm, shoulder, back and so on. If Spirit is willing to cooperate, just the slightest "Touch" anywhere on the Mel meter will be detected and acknowledged with a short 2 sec "beep" and then reset.
Mel-Cal
The Mel Meter is the only Intelligent EMF / Temperature device that uses a proprietary "Smart Calibration" function that allows the user to Calibrate the instrument in the field. Should the unlikely event ever occur, and the unit performs out of calibration Spec. All you need to do is contact us and give us your serial number ID. We will provide you with a special code sequence to get your unit working in "Like New" condition again...it's that simple! -
Mel Meter 8704R "VIBE" EMF Detector$145.00OUTSIDE NORTH AMERICA Mel-8704R-Vibe ProNavigator / EMF & "COLD SPOT" Instrument with Vibration & Touch Detection!
Mel Meter 8704R is Designed Exclusively For Paranormal Investigators
• ELF Range down to 30Hz !
• Night Vision Safe, High Intensity Red Flashlight & Red Backlight
• Custom Dual Display Correlates EMF & Temperature Cold Spots Simultaneously!
• Custom Glow-In-The-Dark Push Buttons. A 30 sec. Charge from Your Flashlight
Lasts 3 Hours!
• Custom Glow-In-The-Dark Lightning Bolt EMF Stickers Help Identify EMF
"Hot Spots" for De-Bunking During Baseline Analysis.
• EMF "Burst" Mode Feature is Ideal for Sweeping a room & Tracking Dynamic EMF movement
• Measurement Ranges: 20, 200, 2000 uTesla
200, 2000, 20,000 mGauss
• Super Bright Custom Red "Night view" Display with On/Off Button
• Fast Response Type "K" Thermocouple Temperature Sensor
• Record Feature Captures Min & Max Values
The Mel Meter Model 8704R is an Intelligent microprocessor based instrument specifically designed for Paranormal Investigators & Enthusiasts. Several Important features have been incorporated into this durable, precision hand held instrument. All of them accessible with the meter being held in on hand.
Measures EMF & Temperature "Cold Spots" Simultaneously
That's right...the Mel Meter is the only Instrument that can do this. If you're a Sci Fi Ghost Hunter fan, you'll notice that during their Investigations, they will often encounter an EMF change which is usually followed by a significant Temperature drop. Now, imagine being able to validate both changes simultaneously, and be able to track the source in real time with one hand in total darkness! No more fumbling for a flashlight to see the display in the dark.
Measures ELF Down to 30Hz!
It has been the generally accepted theory that spirits do emit an extremely low frequency (ELF) EM field, which commonly registers between 2.0 and 7.0 mG in strength. Typically, anything below 40Hz would be considered part of the ELF range. The Mel-8704 was designed to address this ELF range, and is actually 20Hz lower than a KII's 50Hz bandwidth.
Custom Red "Night View" Display
The Backlight display measures a full 2" x 1" with a 0.60" EMF display and 0.25" Ambient Temperature on the same screen. Both measurements can be read from 10' to 15' away.
The display can be turned On or OFF manually for display viewing in dark areas, and it is also bright enough so that it can be used in total darkness to navigate stairwells, corridors and door ways. Illumination of objects up to 8' away is possible with this special display once your eyes become adjusted to the light.
EMF "Burst Mode"
This feature allocates 100% of the micro-processors scan speed to monitor dynamic EMF changes. The display can update so quickly that your eyes will barley be able to keep up with it. If something is on the move, this feature can be activated with the push of a button. I like to use the "Record" function in this mode because it can capture the Min & Max measured values
So, if you have a EMF meter with a standard LCD display, get ready for a big change!
Red Navigator Flashlight (Night Vision Safe)
This feature utilizes a high intensity long life (100,000 hours) Collimated Red LED to provide instant illumination of the floor in front of you, and of objects up to 30' away. Ideal for fast paced tracking of EMF and Cold Spot changes in total darkness while using the backlight display, this 670nm wavelength will not interfere with Nigh Vision Equipment. The White is good if Night Vision is not being used.
Even after 5 hours of 100% continuous uninterrupted usage, The digital current regulation circuitry provides plenty of energy to power the Mel Meter and backlight Display for many more hours.
Mel-Cal
The Mel Meter is the only Intelligent EMF / Temperature device that uses a proprietary "Smart Calibration" function that allows the user to Calibrate the instrument in the field. Should the unlikely event ever occur, and the unit performs out of Spec. All you need to do is contact us and give us your serial number ID. We will provide you with a special code sequence to get your unit working in "Like New" condition again...it's that simple! -
Mel KII Hybrid ProNavigator is Designed Exclusively For Paranormal Investigators
• ELF Range down to 30Hz !
• Night Vision Safe, High Intensity Red Flashlight & Red Backlight
• Custom Dual Display Correlates EMF & Temperature Cold Spots Simultaneously!
• Custom Glow-In-The-Dark Push Buttons. A 30 sec. Charge from Your Flashlight
Lasts 3 Hours!
• Custom Glow-In-The-Dark Lightning Bolt EMF Stickers Help Identify EMF
"Hot Spots" for De-Bunking During Baseline Analysis.
• EMF "Burst" Mode Feature is Ideal for Sweeping a room & Tracking Dynamic EMF movement
• Measurement Ranges: 20, 200, 2000 uTesla
200, 2000, 20,000 mGauss
• Super Bright Custom Red "Night view" Display with On/Off Button
• Fast Response Type "K" Thermocouple Temperature Sensor
• Record Feature Captures Min & Max Values
Measures EMF & Temperature "Cold Spots" Simultaneously
That's right...the Mel Meter is the only Instrument that can do this. If you're a Sci Fi Ghost Hunter fan, you'll notice that during their Investigations, they will often encounter an EMF change which is usually followed by a significant Temperature drop. Now, imagine being able to validate both changes simultaneously, and be able to track the source in real time with one hand in total darkness! No more fumbling for a flashlight to see the display in the dark.
Custom Red "Night Vision Compatible" Display
The Backlight display measures a full 2" x 1" with a 0.60" EMF display and 0.25" Ambient Temperature on the same screen. Both measurements can be read from 10' to 15' away.
The display can be turned On or OFF manually for display viewing in dark areas, and it is also bright enough so that it can be used in total darkness to navigate stairwells, corridors and door ways. Illumination of objects up to 8' away is possible with this special display once your eyes become adjusted to the light.
EMF "Burst Mode"
This feature allocates 100% of the micro-processors scan speed to monitor dynamic EMF changes. The display can update so quickly that your eyes will barley be able to keep up with it. If something is on the move, this feature can be activated with the push of a button. I like to use the "Record" function in this mode because it can capture the Min & Max measured values. So, if you have a EMF meter with a standard LCD display, get ready for a big change!
Red Navigator Flashlight
This feature utilizes a high intensity long life (100,000 hours) Collimated Red LED to provide instant illumination of the floor in front of you, and of objects up to 30' away. Ideal for fast paced tracking of EMF and Cold Spot changes in total darkness while using the backlight display, this 670nm wavelength will not interfere with Night Vision Equipment. Even after 5 hours of 100% continuous uninterrupted usage, The digital current regulation circuitry provides plenty of energy to power the Mel Meter and backlight Display for many more hours.
Mel-Cal
The Mel Meter is the only Intelligent EMF / Temperature device that uses a proprietary "Smart Calibration" function that allows the user to Calibrate the instrument in the field. Should the unlikely event ever occur, and the unit performs out of Spec. All you need to do is contact us and give us your serial number ID. We will provide you with a special code sequence to get your unit working in "Like New" condition again...it's that simple! -
MEL-8704REM With EM RADIATING ANTENNA$179.00THE MEL-8704REM Meter with Electromagnetic Antenna.
THE MEL-8704REM Meter with Electromagnetic Antenna. NOW AVAILABLE! PLEASE ALLOW 1-3 WEEKS FOR DELIVERY AS THESE ARE HAND MADE. If you have ever had contact or felt a presence such as the chill down your spine, energy pass through you or felt something was in front of you. Now that feeling you get you can TEST! MEL - 8704 REM with EM Radiating Antenna ***In addition to detecting AC/DC EMF & Temperature changes in the environment, this New feature also uses a mini telescopic antenna to radiate its own independent magnetic Field around the instrument. This EM field can be easily influenced by materials and objects that conduct electricity. Based on source proximity, strength and EM field distortion...(4) colourful LED lights can be activated and manipulated in any order, sequence or combination if contact is made. ELF Range down to 30Hz ! • Night Vision Safe, High Intensity Red Flashlight & Red Backlight • Custom Dual Display Correlates EMF & Temperature Cold Spots Simultaneously! • Custom Glow-In-The-Dark Push Buttons. A 30 sec. Charge from Your Flashlight Lasts 3 Hours! • • EMF "Burst" Mode Feature is Ideal for Sweeping a room & Tracking Dynamic EMF movement • Measurement Ranges: 20, 200, 2000 uTesla 200, 2000, 20,000 mGauss • Super Bright Custom Red "Night view" Display with On/Off Button • Fast Response Type "K" Thermocouple Temperature Sensor • Record Feature Captures Min & Max Values.
-
Pro Combo (K2 & MEL)$162.00AMAZING PRICE !! K2 PRO & MEL 8704 PRO NAVIGATOR A GREAT BARGAIN !!
A GREAT DEAL !!! GET YOUR K3 METER (UPGRADED K2)
& A MEL METER 8704 PRO NAVIGATOR (RED OR GREEN LED)
FOR ONE GREAT LOW PRICE!!
PLEASE SPECIFY WHAT COLOR DISPLAY FOR MEL METER
WHEN ORDERING COMBO -
Mel-8704-2X$157.00Model: Mel-8704-2X Dual Axis Paranormal Instrument Measures Down to 20Hz (ULF)
Model: Mel-8704-2X
Dual Axis Paranormal Instrument Measures Down to 20Hz (ULF)
The Mel Meter Model 8704-2X is an Intelligent microprocessor based instrument specifically designed for Paranormal Investigators & Enthusiasts. Several Important features have been incorporated into this durable, precision hand held instrument. All of them accessible with the meter being held in on hand.
Measures EMF & Temperature "Cold Spots" Simultaneously
That's right...the Mel Meter is the only Instrument that can do this. During their Investigations, an Investigator will often encounter an EMF change which is usually followed by a significant Temperature drop. Now, imagine being able to validate both changes simultaneously, and be able to track the source in real time with one hand in total darkness! No more fumbling for a flashlight to see the display in the dark.
Measures ULF to 20Hz & ELF Down to 30Hz in one Instrument!
It has been the generally accepted theory that spirits do emit an extremely low frequency (ULF / ELF) EM field, which commonly registers between 2.0 and 7.0 mG in strength. Typically, anything below 40Hz would be considered part of the ELF range. The Mel-8704-2X was designed to address the ULF & ELF range simultaneously
Custom "Night View" Display
The Backlight display measures a full 2" x 1" with a 0.60" EMF display and 0.25" Ambient Temperature on the same screen. Both measurements can be read from 10' to 15' away.
The display can be turned On or OFF manually for display viewing in dark areas, and it is also bright enough so that it can be used in total darkness to navigate stairwells, corridors and door ways. Illumination of objects up to 8' away is possible with this special display once your eyes become adjusted to the light.
EMF "Burst Mode"
This feature allocates 100% of the micro-processors scan speed to monitor dynamic EMF changes. The display can update so quickly that your eyes will barley be able to keep up with it. If something is on the move, this feature can be activated with the push of a button. I like to use the "Record" function in this mode because it can capture the Min & Max measured values
So, if you have a EMF meter with a standard LCD display, get ready for a big change!
Mel-Cal
The Mel Meter is the only Intelligent EMF / Temperature device that uses a proprietary "Smart Calibration" function that allows the user to Calibrate the instrument in the field. Should the unlikely event ever occur, and the unit performs out of Spec. All you need to do is contact us and give us your serial number ID. We will provide you with a special code sequence to get your unit working in "Like New" condition again...it's that simple! -
Mel-8704-2X$157.00Model: Mel-8704-2X INTERNATIONAL ORDERS OUTSIDE NORTH AMERICA Dual Axis Paranormal Instrument Measures Down to 20Hz (ULF)
Model: Mel-8704-2X
Dual Axis Paranormal Instrument Measures Down to 20Hz (ULF)
The Mel Meter Model 8704-2X is an Intelligent microprocessor based instrument specifically designed for Paranormal Investigators & Enthusiasts. Several Important features have been incorporated into this durable, precision hand held instrument. All of them accessible with the meter being held in on hand.
Measures EMF & Temperature "Cold Spots" Simultaneously
That's right...the Mel Meter is the only Instrument that can do this. During their Investigations, an Investigator will often encounter an EMF change which is usually followed by a significant Temperature drop. Now, imagine being able to validate both changes simultaneously, and be able to track the source in real time with one hand in total darkness! No more fumbling for a flashlight to see the display in the dark.
Measures ULF to 20Hz & ELF Down to 30Hz in one Instrument!
It has been the generally accepted theory that spirits do emit an extremely low frequency (ULF / ELF) EM field, which commonly registers between 2.0 and 7.0 mG in strength. Typically, anything below 40Hz would be considered part of the ELF range. The Mel-8704-2X was designed to address the ULF & ELF range simultaneously
Custom "Night View" Display
The Backlight display measures a full 2" x 1" with a 0.60" EMF display and 0.25" Ambient Temperature on the same screen. Both measurements can be read from 10' to 15' away.
The display can be turned On or OFF manually for display viewing in dark areas, and it is also bright enough so that it can be used in total darkness to navigate stairwells, corridors and door ways. Illumination of objects up to 8' away is possible with this special display once your eyes become adjusted to the light.
EMF "Burst Mode"
This feature allocates 100% of the micro-processors scan speed to monitor dynamic EMF changes. The display can update so quickly that your eyes will barley be able to keep up with it. If something is on the move, this feature can be activated with the push of a button. I like to use the "Record" function in this mode because it can capture the Min & Max measured values
So, if you have a EMF meter with a standard LCD display, get ready for a big change!
Mel-Cal
The Mel Meter is the only Intelligent EMF / Temperature device that uses a proprietary "Smart Calibration" function that allows the user to Calibrate the instrument in the field. Should the unlikely event ever occur, and the unit performs out of Spec. All you need to do is contact us and give us your serial number ID. We will provide you with a special code sequence to get your unit working in "Like New" condition again...it's that simple! -
SUPPORT OUR TEAM by Purchasing
your very own Paranorbill T-Shirt
Own Your very own Paranorbill T-Shirt
It's the same one's we wear on the show
Please specify your size we have
Medium / Large / XL / XXL
-
A / E-Pod Detects the E-Field that surrounds Static Electricity$45.00
E-Pod Detects the E-Field that surrounds Static Electricity
-
P-SB7 DELUXE KIT / Mini Frequency Sweep Radio ITC Device$119.95
Mini AM/FM Frequency Sweep Radio
(MP3 Speaker & Batteries Included )
Internal Speaker -
Sony DVR-01 Night Vision Motion Camera Audio/Video$155.95
NIGHT VISION INFRA RED MOTION SENSITIVE Captures Audio Picture & Video
-
DAS-EVP / Worlds First Expandable Digital EVP Recorder Designed Exclusively from the "Ground Up" For Paranormal Research Applications$179.95
Worlds First Expandable Digital EVP Recorder Designed Exclusively from the "Ground Up" For Paranormal Research Applications.
This is a High End, CD quality EVP recorder. Several important features have been designed into this instrument that allow the user to add additional features and functionality as their investigative learning skills advance. When you buy the DAS-EVP, you are essentially buying our most advanced RT-EVP device with limited software capabilities that do not include the Real Time Playback and Frequency Sweep function. If at any time you wish to purchase and advance to the full function RT-EVP device, we will provide you with a user specific password at the time of purchase that will activate the other features instantly. It's that simple! -
RT-EVP Gen II (2) Real Time EVP Recorder IN STOCK$279.00
Worlds first Real Time EVP Recorder RT-EVP For Paranormal Use LIMITED STOCK (in Stock)
-
RT-EVP Gen II (2) Real Time EVP Recorder IN STOCK (outside North America)$279.00
Worlds first Real Time EVP Recorder RT-EVP For Paranormal Use LIMITED STOCK (in Stock)
-
K2-Navigator / EMF Meter with On/Off Switch / Night Vision Safe LED$69.95
KII Pro Navigator / EMF Meter with On/Off Switch and Night Vision Safe Red Light Source
-
K2 Pro Navigator (Outside North America)$69.95
KII Pro Navigator / EMF Meter with On/Off Switch and Night Vision Safe Red Light Source
-
-
MEL-8704 Pro Navigator (OUTSIDE NORTH AMERICA) AIR MAIL$94.00
The Mel-8704-ProNavigator Green LCD Display INTERNATIONAL ORDERS OUTSIDE NORTH AMERICA
-
-
Mel Meter 8704R "VIBE" EMF Detector$145.00
Mel-8704R-Vibe ProNavigator / EMF & "COLD SPOT" Instrument with Vibration & Touch Detection!
-
Mel Meter 8704R "VIBE" EMF Detector$145.00
OUTSIDE NORTH AMERICA Mel-8704R-Vibe ProNavigator / EMF & "COLD SPOT" Instrument with Vibration & Touch Detection!
-
-
MEL-8704REM With EM RADIATING ANTENNA$179.00
THE MEL-8704REM Meter with Electromagnetic Antenna.
-
Pro Combo (K2 & MEL)$162.00
AMAZING PRICE !! K2 PRO & MEL 8704 PRO NAVIGATOR A GREAT BARGAIN !!
-
Mel-8704-2X$157.00
Model: Mel-8704-2X Dual Axis Paranormal Instrument Measures Down to 20Hz (ULF)
-
Mel-8704-2X$157.00
Model: Mel-8704-2X INTERNATIONAL ORDERS OUTSIDE NORTH AMERICA Dual Axis Paranormal Instrument Measures Down to 20Hz (ULF)
-